Technical Usage of Anchor Bolt – J Check/Bend 45° (Cast-In-Place):
The 45° bend in this Anchor Bolt – J Check enhances its hold within concrete, helping to distribute forces evenly and resist pull-out, especially under lighter loads or conditions with low-to-moderate dynamic stress. This type of anchor bolt is commonly used in construction and industrial applications that involve fastening beams, columns, and equipment bases to concrete foundations. It is embedded in concrete during the pouring process, where the 45° angle offers additional surface contact, providing reliable support in applications that do not require the full resistance of steeper-angled anchor bolts. These bolts are particularly well-suited for projects involving periodic maintenance or lighter load structures, ensuring both adaptability and ease of use.
Technical Specs in Table Format of Anchor Bolt – J Check/Bend 45° (Cast-In-Place):
Specification | Details |
---|---|
Material | High tensile steel, stainless steel |
Diameter | M8 to M30 |
Length | 100 mm to 1000 mm, custom lengths available |
Threading | Partial or full threading |
Finish | Galvanized, hot-dip galvanized, untreated |
Tensile Strength | 300 MPa to 800 MPa |
Corrosion Resistance | Galvanized options for enhanced durability |
Bend Angle | Precisely 45° for moderate load applications |
Types of Item for Anchor Bolt – J Check/Bend 45° (Cast-In-Place):
The Anchor Bolt – J Check/Bend 45° is available in several variations to meet a range of project needs. Standard J Check 45° Bolts provide basic anchoring support, while extended-length versions offer deeper embedment for added security. Galvanized 45° Bolts are ideal for projects exposed to outdoor elements, providing protection against rust and corrosion. For applications requiring light-to-moderate load capacity, lower-tensile J Check 45° Bolts are also available, and custom-threaded options can be provided to suit specific installation requirements.
History of Anchor Bolt – J Check/Bend 45° (Cast-In-Place):
The J Check/Bend 45° Anchor Bolt was developed as a versatile solution for construction and industrial projects that required moderate pull-out resistance without the need for steeply bent bolts. Introduced as part of a wider array of anchor bolts with varying bend angles, the 45° version quickly gained popularity for projects involving moderate loads, offering ease of installation and flexibility. Over time, the design has been refined with enhanced material quality and corrosion-resistant finishes, allowing it to meet the growing demand for adaptable and reliable anchor solutions in both structural and light-industrial applications.